INSTRUCTIONS

  • LOCATE THE BARREL PLUGS WHICH ARE CONNECTED TO THE RED & BLACK CABLES ON THE RIGHT HAND LOWER SIDE OF THE BOOTH.

  • TAKE THE RED CABLES AND CUT THE WIRES ON BOTH ENDS OF THE BARREL PLUG CONNECTORS WITH WIRE CUTTERS OR SCISSORS.

  • GATHER ALL THREE RED WIRES AND INSERT THEM IN TO THE NEW CONNECTOR, ONE WIRE PER HOLE.. (MAKE SURE THAT THE WIRES GO ALL THE WAY IN TO THE CONNECTOR SO THEY TOUCH THE OPPOSITE WALL.)

  • USE A PAIR OF PLIERS TO CLAMP DOWN ON THE CONNECTOR SEALING THE WIRES IN PLACE.

  • REPEAT THESE STEPS WITH THE BLACK WIRES.